Cornice Connect

Australia · 2 Employees
Cornice Connect has patented a revolutionary aesthetic trim that can easily be installed by a non-skilled worker to join two cornice pieces, concealing the unfinished cornice ends, and enabling cornice movement within the connector piece. Cornice Connect's precision moulded trim system joins two plaster cornice pieces, mitigating the causes of cornice cracking, saving builders and homeowners significant costs associated with rectification of cracks, and providing a solution to help ease the issues associated with the national shortage of skilled plaster tradespeople. Plaster cornice is manufactured in 5.4m lengths. Therefore, in long rooms, such as hallways, garages or loungerooms, where the wall length is longer than 5.4m, cornice pieces need to be joined together. This is currently achieved through skilled plaster setters setting the join with plaster compound. However, plaster cornice is not designed to ‘flex' to accommodate to ‘natural structural building movements' or change in temperature or humidity. As a building settles or if there is movement in a building, there is significant risk that the cornice will ‘crack' at these joins, resulting in unsightly cracks and gaps. In Australia, industry manufacturers' technical guidelines state cornice is to be separated either side of a ceiling control joint or in cornice lengths of over 12m by the way of a saw or knife cut to the cornice to enable controlled movement. This results in an ‘unfinished' appearance. These cuts can vary in separation (generally) between 1-5mm in width. Plaster cornice also needs to be professionally ‘set' where there is a change of direction in the cornice, for example at 90-degree angles. Cornice Connect has also developed connectors that join cornice at internal and external angles – not requiring skilled trades to install them, they enable ‘building movement' within the joiners and mitigate cracking at cornice angle joins.

概述

国家 Australia
成立时间 2020
总部 Gold Coast , Queensland
电话号码
网站 http://www.corniceconnect.com
LinkedIn http://www.linkedin.com/company/cornice-connect
Twitter
Facebook https://www.facebook.com/profile.php
员工数 2
行业 building materials,
简介 Cornice Connect has patented a revolutionary aesthetic trim that can easily be installed by a non-skilled worker to join two cornice pieces, concealing the unfinished cornice ends, and enabling cornice movement within the connector piece. Cornice Connect's precision moulded trim system joins two plaster cornice pieces, mitigating the causes of cornice cracking, saving builders and homeowners significant costs associated with rectification of cracks, and providing a solution to help ease the issues associated with the national shortage of skilled plaster tradespeople. Plaster cornice is manufactured in 5.4m lengths. Therefore, in long rooms, such as hallways, garages or loungerooms, where the wall length is longer than 5.4m, cornice pieces need to be joined together. This is currently achieved through skilled plaster setters setting the join with plaster compound. However, plaster cornice is not designed to ‘flex' to accommodate to ‘natural structural building movements' or change in temperature or humidity. As a building settles or if there is movement in a building, there is significant risk that the cornice will ‘crack' at these joins, resulting in unsightly cracks and gaps. In Australia, industry manufacturers' technical guidelines state cornice is to be separated either side of a ceiling control joint or in cornice lengths of over 12m by the way of a saw or knife cut to the cornice to enable controlled movement. This results in an ‘unfinished' appearance. These cuts can vary in separation (generally) between 1-5mm in width. Plaster cornice also needs to be professionally ‘set' where there is a change of direction in the cornice, for example at 90-degree angles. Cornice Connect has also developed connectors that join cornice at internal and external angles – not requiring skilled trades to install them, they enable ‘building movement' within the joiners and mitigate cracking at cornice angle joins.

技术

Apache

Load Balancers

Google Font API

Fonts

Microsoft Office 365

Other

Mobile Friendly

Other

Outlook

Email Providers

WordPress.org

CMS

常见问题

Cornice Connect 在哪里?

Cornice Connect 的总部位于 Gold Coast , Queensland

Cornice Connect 的电话号码是多少?

Cornice Connect 的电话号码是

Cornice Connect 的官方网站是什么?

Cornice Connect 的公司官方网站是 http://www.corniceconnect.com

Cornice Connect 是做什么的?

Cornice Connect 的业务有哪些?

Cornice Connect 的年收入是多少?

Cornice Connect 的收入是 0美元

Cornice Connect 有多少员工?

Cornice Connect 有 2 名员工

Cornice Connect 属于哪个行业?

Cornice Connect 从事以下行业: building materials

Cornice Connect 使用什么技术?

Cornice Connect 使用的一些流行技术包括: Apache,Google Font API,Microsoft Office 365,Mobile Friendly,Outlook,WordPress.org

如何联系 Cornice Connect?

Cornice Connect 联系信息: 电话号码:, 网站:http://www.corniceconnect.com, 邮箱:-

Cornice Connect 的社交媒体链接是什么?

Cornice Connect 领英:http://www.linkedin.com/company/cornice-connect,fackbook:https://www.facebook.com/profile.php,twitte:

Cornice Connect 是一家上市公司吗?

不是

Cornice Connect 的最后一轮融资是什么时候?

暂无最近投资信息

谁投资 Cornice Connect?

Cornice Connect 有 0 家投资者,包括 。

外贸获客 查找关键决策人

10亿+海关交易数据,1.2亿企业数据,2亿+企业联系人数据,1000千万真实采购商。覆盖200+个国家及地区,95%外贸重点拓展市场,可根据行业、经营范围等多方位挖掘目标客户。
免费试用

Top-ranked on G2 Crowd

全球B2B企业库 海关贸易数据 展会采购数据

工作更少,成就更大,销售更聪明

查找更多 B2B 联系人,丰富并验证记录
Email Address

全球B2B企业库

海关贸易数据

展会采购数据

Top-ranked on G2 Crowd

OR
Sign Up with Google